Factory Outlets Ceramic Ring Used In Pumps - Alumina Ceramic Rings – Xindeng
Factory Outlets Ceramic Ring Used In Pumps - Alumina Ceramic Rings – Xindeng Detail:
Technical Parameters
| Operating Limits | Units | Alumina Ceramics | Alumina Ceramics |
| Alumina Content | wt% | ≥ 99 | ≥ 95 |
| Volume Density | g /cm3 | 3.85 | 3.7 |
| Hardness (HRA) | HRA ≥ | 88 | 86 |
| Compressive Strength | MPa ≥ | 400 | 300 |
| Maximum Temperature | ℃ | 1500 | 1500 |
| Air Tight Test | Pass | Pass | |
| Thermal Shock Test | Pass | Pass | |
| Coefficient Of Heat Expansion | ×10-6/℃ | 8.2 | 7.5 |
| Dielectric Constant | εr20℃, 1MHz | 9.2 | 9 |
| Dielectric Loss | tanδ×10-4, 1MHz | 2 | 3 |
| Volume Resistivity | Ω·cm 20℃ | 1014 | 1013 |
| Puncture Strength | KV/mm , DC≥ | 20 | 20 |
| Acid-resistance | mg/cm2 ≤ | 0.7 | 7 |
| Alkali-resistant | mg/cm2 ≤ | 0.1 | 0.2 |
| Abrasion Resistance | g/cm2 ≤ | 0.1 | 0.2 |
| Compressive Strength | M Pa ≥ | 2800 | 2500 |
| Flexural Strength | M Pa ≥ | 350 | 200 |
| Elastic Modulus | G Pa | 350 | 300 |
| Poisson’s Ratio | 0.22 | 0.2 | |
| Thermal Conductivity | W/m·K( 20℃) | 25 | 20 |
Product detail pictures:
Related Product Guide:
We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Factory Outlets Ceramic Ring Used In Pumps - Alumina Ceramic Rings – Xindeng, The product will supply to all over the world, such as: St. Petersburg, Ukraine, Myanmar, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Andy from Poland - 2018.12.11 11:26
As a veteran of this industry, we can say that the company can be a leader in the industry, select them is right.
By olivier musset from Belgium - 2017.01.11 17:15
